Ripple to Pattern

Once Pleat-to-Pattern draperies became an industry standard, Ripple-to-Pattern wave draperies were soon to follow, thanks to a variable wave tape developed by Forest Group. 
This graphic drapery, recently fabricated for Denise Wenacur Design and Decor, illustrates perfectly the striking effect possible when rippling to pattern. 

A few weeks later we used the same technique to fabricate geometric ripple-to-pattern for Cottages to Castles, installed by Scott Berniker who kindly provided photos.

All ripplefold begins with the rod.  We template the master carrier by fitting translucent snap tape to the actual hardware, using a fabric stapler.

 

This ensures a perfect fit on installation day.

We make a template of the header and plot out the placement of the pattern.  I make sure to include every detail during this step.

The header template is one reason to always order a little more fabric than the project strictly requires.  With the widths joined on the template, we can be sure the seams fall to the back of the ripples rather than show on the front.

After the drapery is on the table, we align the template to be sure everything is where it should be.

In our workroom, we prefer to fabricate with no stitching visible on the front- a huge change from the old way in which one of two rows of stitching were considered inevitable.

Our method for fabricating begins with a lock-stitch (basically an interlocking stitch which itself is actually a long, loose blanket stitch) to hold the lining and face fabric together, just past the crease on the heading side.  

Translucent 2" Dofix buckram is fused right at the crease line.

Easy-flex tape from Forest Group is secured with a narrow strip of Jewel tape down the center.

Our template show exactly where to position the 3 snaps.

The doubled heading is folded under, and the Easy-flex tape is staple-basted on both sides, through the heading only.

The ends are finished neatly (and hand-sewn after the tape is applied).

The header is opened up flat, and the Easy-flex tape is sewed on both sides.

All that remains is to hand-sew the ends, and insert the Easy-flex Hooks.

The only thing that varied between the two projects: the orange drapery is blackout, and we did not use buckram, concerned that it might not fuse securely.  Instead, we opted to hold the header down with a double-sided adhesive tape.

Did you read all the way to the end?  One thing that really super thrilled me, for the second time ever, I made pleat-to-pattern draperies AND a shade for the same room!  If you're a workroom nerd too, you'll totally get it :)