THE BLOG IS HAVING TROUBLE WITH COMMENTS! SOMETIMES THEY DON’T GET PUBLISHED, AND WHEN THEY ARE I AM UNABLE TO REPLY TO THEM. IF THAT HAPPENS, JUST EMAIL ME AT stitchlore@gmail.com.

Looking for something specific? Check out the Topic Index, or the Search bar, just below, on the left.



Sorry about this problem!

SO.........WHAT ARE WE WORKING ON TODAY??

Tuesday, August 8, 2017

Like riding a bike?.... first job in new workroom

The first job fabricated in the new workroom was installed!........... 6 stationary flat romans used as valances,  lined and interlined, for Nature's Window.
We have been in the process of moving the workroom since mid-June, so after more than a month without a normal schedule or normal workplace, it isn't easy to get back into the swing of fabrication.
Before vacation, the last job was a top down bottom up shade for Crosstown Shade and Glass, which was also the last shade to be photographed in the hallway in the old workroom.  I documented the fabrication of this shade so as soon as the dust settles, I'll do a post about it. 
After vacation we made one last job in the old workroom: a pair of ripplefold panels for Suite Dream.  I'll do a blog post on these, too, as soon as I receive photos of them installed.  I did a lot of research and planning for this project and I want to write about what I learned.
So after the ripplefold, we knuckled down in earnest to get the workroom moved.   I have occasionally posted photos on our Facebook page and will eventually do a blog post about the way we set up the new space.
Last week, before we were really fully set up, I was ready to make the 6 shades, after more than a month of disruption.  I wish I could say it was like riding a bike, but really, I was nervous and exceedingly cautious.
The client added a shade to the order with the same yardage, so I had to work differently than I had originally planned, and I spent way more time than usual checking and double-checking my cuts to make sure that the pattern was aligned on all.
Also two shades were wider than the width of the fabric and needed widths joined- a challenge at any time with appliqued or embroidered fabric, but especially after weeks away from a sewing machine.
 I might as well say right here: to do this work, you sometimes need nerves of steel.  It takes a lot of confidence to cut into thousands of dollars' worth of fabric that belongs to someone else!
After a month hiatus, you can bet I was nervous!  I had to draw on all the confidence and experience I had stored up.  In addition, I was trying to find my way around an unfamiliar space, my tools and materials put away logically but unfamiliarly!  At least a dozen times I had to search to find a simple tool.
Once I got into it, it was comforting to wield a needle and thread again.  Hand-sewing side hems and rings is a repetitive but soothing process.  John had speakers set up by then so I put on some music and got into the sewing rhythm.
The added shade required a shorter finished length, so I had to choose between making the pattern pleat the same on all 6 valances but have the top different on the short one, or, make the top the same and have the pattern pleat differently.
Since this shade was in a different space, I decided to make the folds the same on all. 
Now this week I am working on a variety of products: draperies, shades, valances, bedding and pillows- enough to get me back into the groove, I hope; stay tuned!

3 comments:

  1. Lovely shades! I am looking forward to your notes on the TDBU,as well as the ripplefold.
    Susie

    ReplyDelete
  2. Your work is so s amazing. I am going to try my hardest to get to one of your classes in North Carolina

    ReplyDelete