135" of drama. And arched shades.

On installation day, it often happens that we are so wrapped up in the details of the work, we forget to really look and see how beautiful the treatments are.  That's what happened to me with this job for Denise Wenacur: drapery panels 135" long flanking sheer arched relaxed shades.  When I got home and saw the photos on the computer, I was astonished at how dramatic this room had become!

The panels are two-finger Euro pleats with 6" buckram.

The shades are a very sheer voile, mounted on very discreet frames that blend in with the woodwork.

Making those frames was the biggest challenge of the project.  There was a lot of trial and error.  I chose to use FirmAFlex for the arched part.  It's white and I hoped it would blend in with the wood, but in the end I covered it all with fabric after all. 
The first template was made from paper, and then a second template from foam board.  I wanted something that was rigid, to fit into the space without flexing, for testing; but also a material that I could modify if corrections were needed.

John rigged up a way to stabilize the sheets of FirmAFlex so it could be cut with a jigsaw. 

The arch was attached to the dustboard, then a narrow strip to the top.  This is the back, facing outside.

The narrow edge became the front.  All the surfaces were eventually covered with fabric, hiding the little angle iron, the raw edges, and the joins.  In the window, the frame just disappears and looks like the woodwork.

When the shades were fabricated, the ladder tape stopped just above the board line, and I ran a line of basting thread along the board line as a reference for stapling later.

I'm getting ahead of the story now, but here, the shade already stapled on and hung on a Workroom Valet, you can see how the basting line guided the fabric placement.

But back to the fabrication story.  When it was time to put the shade on the frame, I eventually decided to run double-sided tape along the arch, and carefully fold the fabric (cut following the arch) up over the edge, easing in the fullness, and sticking it to the tape.

Next came the part where I forgot to take pictures of applying a narrow piping to the edge, and covering all remaining surfaces with fabric.  Then Rollease traversing clutches were mounted and rigged, the shade strung, and leveled- then packed for installation.

On installation day, our talented installer Mario dressed the draperies to perfection. 

In order to get the pleats and spaces right, I made mockups of the stripe and marked everything before trimming down the widths for joining.

In the adjacent dining room, two-finger Euro pleat panels are drawn to each side.  Sheer relaxed shades under the panels are just like the living room shades, minus the arch.

Arched Flat Roman Shade

How do you like our arched window treatment?  Really, that IS an arched flat Roman shade!  It's a shame that you can't see the arch; the installer said it fit perfectly. 

The homeowner does not like her arch.  She wanted to hide it.  The only proof I have that we made an arched Roman shade is the workroom photos.   That's John, holding the shade and waving to me.

Here he is, trying to suck in his gut for this picture.  As if.  He's a skinny rail these days.  The workroom is a real mess, though, isn't it?  Trash can overflowing, chairs up on the work table, must have been a busy day.  Ha.

This is a ribbed flat Roman.  The frame is made entirely from FirmaFlex.  

The Rollease clutch is set in enough that brackets can be used on the sides of the window molding.  You can see that we used mesh tube shroud for this shade.

I forgot to take a picture of the front of the frame, before stapling the shade on.  Here I've tried to pull the fabric back and get a shot of the inside of the front.  It's made to be open, so the installer can get his drill in there and put in a couple of screws up into the top of the window. 

The Empire valance is soft and sweet, made from an upholstery fabric with the shade matelasse as the lining.

Lip cord defines the edge.  I forgot to take a close-up of the draperies, which are made from the same face fabric plus the lip cord plus brush fringe.

Did I mention this is for a newborn baby girl's room?  A nice room to wake up in!

 Sweet dreams, baby!