Re-purposing

We've spent considerable time in the house with the huge hobbled shades for Denise Wenacur, and last week it was time to go upstairs to the master bedroom, where we re-purposed the homeowners' existing window treatments.

Crown molding was added, so for two windows, the draperies needed shortening. 

And the turret had a full set of draperies until the seating area was built, so they were re-made into Roman shades, the band and rope lead edge detail transformed into bottom shade detail.

Ribs ensure that the folds do not need dressing, a helpful feature in shades that are mounted high and are not so easy to reach.  We sew, rather than glue, ribs onto interlining in between the rings so the folds will have some rigidity.

Dofix 6" fusible buckram provided support for the bottom banding.

Re-purposing generally involves some improvisation, to make the existing materials work for the new application.  In this instance, we had to fiddle a bit to make the banding work.  Although we usually make a double bottom hem, the banding was just wide enough to create a single hem, so Dofix Bortenfix was used to secure the hem below the weight bar pocket......

then Dofix fusible gimp covered the raw edge.  The rings were sewn through all materials so the stitching would provide extra security for  the band and the gimp.

After the weight bar was inserted into the pocket, the gimp end was tucked in and secured....

Then the bottom pocket ladderstitched closed.

Dofix 8" fusible buckram gave body to the topper, which I wanted to be somewhat supported but not quite as rigid as a soft cornice.  We mitered the top and fused Dofix velcro to the back edge so the topper could be mounted easily on installation day.

Fabric staples secured the fabric layers at the top......

and because these shades are reverse mounted, Dofix fusible velcro was added to the front.

The shade snaps off of the headrail for easy installation, then just as easily snapped back on.  The lift system is the Rollease SS38 from Designers Resource, chosen for its awesome gear ratio that allows this shade to be nearly fully raised with just one pull of the continuous bead loop chain. 

The little toppers behaved just as I wanted them to.

Ta-da!  (and yes, we fabricated those cushions, too.)

French Blackout shade with contrast banding

Every time I make a shade, I tweak my method a little bit.  I was concerned about making certain the contrast band on this shade to stays nice and crisp. 

I didn't take individual step-by-step photos of the basic construction, because there are plenty of those on the blog.  Instead, here you can see it deconstructed.
The fabrics were pretty stable, but this shade was French blackout lined, so it was bulky.  I doubled up the fusible buckram in the hem, and I fused the weight bar tube to it. 

When I turned up the hem, it was incredibly solid and secure.

 

I hand-sewed the hem before adding the bottom row of rings and inserting the weight bar.  Even though the weight bar tube is fused to the buckram, it's essential that the stitches for the rings go through the tube.  The stitching also must go all the way to the end of the hem, not stop at the ring.

The back looks amazing!

 

Oh, and the front does too :)

A surprise, improv, return flaps, and color-block

Workrooms often don't get to see their work in a truly finished room.
Often when we go to measure, the room is still under construction, like this one.

The day we came to install the treatments, there was a carpet in place but no furniture.

There was also a big surprise.

These built-ins were not there when I measured!!! 
The shade needed barely 1/4" off one side of the board.  The fabric fit just fine.
Well, we are nothing if not problem-solvers, and Mario's improv experience serves him well in all phases of his life.  He wielded the saw, and I helped by applying my weight to the miter box.  A little hot glue and a couple of screws later, that shade was hangable.

Fusible buckram has more magical uses than I can count, and one of my faves is to stiffen return flaps for shades.  Here I made 5 pair.  Sewing them makes them too bulky so I use double-sided adhesive. 

A quick fold and steam-

And they're ready to be attached.

Here they are from the front, on a different shade.

A peek underneath-

And from behind:

Curious to see the color-block shade?